The hook-and-loop fastening (hooks) is covered with a non-slip material when not in use. With 4 LC MOLLE height-wise slotting.

Both the CORDURA® materials as well as webbing, hook-and-loop fasteners and buckles meet the high German Bundeswehr standards TL 8305-0278 and TL 8305-0281 with regard to the IRR camouflage effect (IRR 650 – 1250nm / 10 – 42%).

The TT Small Combi Rig IRR has a removable hook-and-loop magazine module that can be used on plate carriers. The accessories pocket and MOLLE side flaps are also removable.

Both the CORDURA® materials as well as webbing, hook-and-loop fasteners and buckles meet the high German Bundeswehr standards TL 8305-0278 and TL 8305-0281 with regard to the IRR camouflage effect (IRR 650 – 1250nm / 10 – 42%).

More detailed information about the TT Small Combi Rig is available here.

The TT Plate Carrier QR LC ZP IRR has zippers on the back that allow it to be loaded with various ZP series panels and packs designed for it. It is delivered including a zipped-on panel (TT Molle Panel ZP IRR, item 7354). The size is designed for SAPI panels from 25 x 30 cm to a maximum of 26 x 33 cm – depending on the thickness of the panels.

Made of CORDURA® and material with IRR finish

Both CORDURA® materials and webbing, hook-and-loop and buckles meet the high Bundeswehr standards TL 8305-0278 or TL 8305-0281 regarding IRR camouflage (IRR 650 – 1250nm / 10 – 42%).

Thanks to the cummerbund reinforced with Tegris® material, this plate carrier is lightweight yet very stable. The cummerbund has laser-cut holes with MOLLE spacing and can be clipped into two height positions on the front. An elastic fastening element on the cummerbund ensures freedom of movement and length adjustability. A removable flat MOLLE panel offers the option of quickly changing and removing equipment.

Also included: a lightweight, elastic cummerbund with three magazine pouches (M4 size) on each side.

Both the CORDURA® materials and the straps, hook-and-loop fasteners and buckles meet the high German Bundeswehr standards TL 8305-0278 and TL 8305-0281 with regard to the IRR camouflage effect (IRR 650 – 1250nm / 10 – 42%).

The TT Molle Panel ZP IRR is designed for the TT Plate Carrier QR LC ZP IRR, the attachment is made via side zippers. The panel can also be mounted on other plate carriers on the market with the appropriate zipper length and width. In addition, the included zippered MOLLE strip allows it to be attached to plate carriers with the same MOLLE scheme as item 7504. An additional adapter is included for attachment to classic MOLLE straps. With integrated pocket, e.g. for a hydration bladder.

Made of CORDURA® and material with IRR finish

Both the CORDURA® materials and the webbing, hook-and-loop fasteners and buckles meet the high Bundeswehr standards TL 8305-0278 or TL 8305-0281 regarding IRR camouflage (IRR 650 – 1250nm / 10 – 42%).

The TT Tool Pack ZP IRR is designed for the TT Plate Carrier QR LC ZP IRR, the attachment is via side zippers. The pack can also be mounted on other plate carriers on the market with the appropriate zipper length and width. In addition, In addition, the included zippered MOLLE strip allows it to be attached to plate carriers with the same MOLLE scheme as item 7504. An additional adapter is included for attachment to classic MOLLE straps. The fold-out main compartment is suitable for bolt cutters up to a length of 80 cm, the fold-out front compartment accommodates various entry tools, and the hooked-in tubes can also be removed. In addition, the pack has insertion options for breach pens on the sides. On the front is MOLLE in laser-cut design, the elastic side compression can be removed.

Made of CORDURA® and material with IRR finish

Both the CORDURA® materials and the webbing, hook-and-loop and buckles meet the high Bundeswehr standards TL 8305-0278 or TL 8305-0281 regarding IRR camouflage (IRR 650 – 1250nm / 10 – 42%).

The TT Operator Pack ZP IRR is designed for the TT Plate Carrier QR LC ZP IRR, the attachment is made via side zippers. The pack can also be mounted on other plate carriers on the market with the appropriate zipper length and width. In addition, the included zipper MOLLE strip allows it to be attached to plate carriers with the same MOLLE scheme as item 7504. An additional adapter is included for attachment to classic MOLLE straps. The backpack has a flat main compartment, which is equipped with a hydration system preparation and whose back wall is covered with MOLLE hook-and-loop for individual equipment. It also has two large front pockets. The upper front pocket is equipped with interchangeable magazine inserts. The modular components can also be attached in the main compartment.

Made of CORDURA® and material with IRR finish

Both the CORDURA® materials and the webbing, hook-and-loop fasteners and buckles meet the high Bundeswehr standards TL 8305-0278 or TL 8305-0281 regarding IRR camouflage (IRR 650 – 1250nm / 10 – 42%).

The TT Modular Chest Rig 4xM4 IRR has detachable side pouches and a front flap with hook-and-loop fastening for size M SAPI plates.

It features MOLLE in laser-cut design and can be combined with the TT Modular Chest Rig Pack IRR. It can also be attached to plate carriers. Removable shoulder pads are included.

Both the CORDURA® materials and the straps, hook-and-loop fasteners and buckles meet the high German Bundeswehr standards TL 8305-0278 and TL 8305-0281 with regard to the IRR camouflage effect (IRR 650 – 1250nm / 10 – 42%).

The magazine pouches are designed for G36, SIG, AUG, M4, M16, STG. They can also be used as double pouches for 2 x 4 M4 magazines or similar plastic and metal magazines.

Both the CORDURA® materials as well as webbing, hook-and-loop fasteners and buckles meet the high German Bundeswehr standards TL 8305-0278 and TL 8305-0281 with regard to the IRR camouflage effect (IRR 650 – 1250nm / 10 – 42%).

Size 1 corresponds with S/M and is suitable for SAPI plates (30 x 25 cm). Size 2 corresponds with L/XL and is suitable for SAPI plates from 30 x 25 cm to 34 x 33 cm. The plate carrier has a flexible drop system and is provided with an SR buckle for fast dressing; the buckle can be mounted on the right or the left.

Both the CORDURA® materials as well as webbing, hook-and-loop fasteners and buckles meet the high German Bundeswehr standards TL 8305-0278 and TL 8305-0281 with regard to the IRR camouflage effect (IRR 650 – 1250nm / 10 – 42%).